Pictured:

Anda sedang berada di: Home » Komponen Elektronika » Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600

  Rp. 1.400.000,-

(stok: 1)

beli
Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600

Jual Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600 Murah

Spesifikasi :

  • Mach3 USB 100 KHz CNC Controller Breakout Board.
    1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.
    2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
    3. Support automatic probe tool.
    4. Support Emergency input.
    5. Support for limit switch.
    6. Support for connecting electronic handwheel.
    7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
    8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
    9. 4 general-purpose inputs, you can connect the limit switch, e-stop switch, probe switch, back to zero and other device.
    10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
    11. 1 status LED, indicate connection status on the board. 
  • TB6600 Single Axis 4A Stepper Motor Driver.
    This unit is an upgraded version of TB6600, the breakdown of increase to 32 segments, for high targeting purposes. Applicable stepper motor: 42.57, 86 Phase type phase (4 wire 6 wire 8 wire line).
    1. 9V-42V DC power supply.
    2. H-bridge Bipolar constant-phase flow-driven.
    3. The maximum output current of 4.0A eight optional.
    4. Up to 32 segments of six types of sub-modes available.
    5. The input signal is high-speed optical insulation.
    6. Standard common anode single pulse interface.
    7. HOLD function offline.
    8. Semi-closed chassis can accommodate the most demanding environment.
    9. Provide semi-automatic current locking function.
    10. Built-in thermal protection and overcurrent protection.
    11.Size: 9.6*5.5*2.7cm.

     

  • Package Contents:
    1 x USB CNC Controller Card.
    1 x USB cable.
    1 x CD.
    3 x Driver TB6600.
  • Kondisi: Baru
  • Berat: 1000gr

Jual Mach3 USB 100 KHz CNC Controller komplit 3 Driver TB6600 Murah

Produk Lainnya
Keranjang belanja
0 item produk
Total: Rp. 0
Customer Service

• Merry Dita A


Kontak Toko


TOKO DEPOINOVASI

Perum Chandra Kirana Regency B2-03 Watugede, Singosari-Malang 65153


Buka Senin-Sabtu

Jam Kerja 08.00-17.00 WIB


WA: 085646399200

Email: depoinovasi@yahoo.com

Random Produk
Jumlah Pengunjung

Pengunjung hari ini : 89
Total pengunjung : 659749

Hits hari ini : 3568
Total Hits : 4148626

Pengunjung Online: 14

4148626


Bank Support

Delivery Support